How to use:
Before charging:
Check your battery parameters is compatible to the charger
When charging:
1.Connect the red clamp to the positive pole(+), black clamp to the negative pole.
2.Connect the charger with AC power source, the charger will start to operate.
3.Once the battery is fully charged, the battery bar on screen will in “FUL” status.
Charging completed:
Keep the charged status in 1-2 hours is highly recommended, Then, remove the charger.
Description:
Microprocessor Control (CPU).
1. Smart Automatic Charger:
2. This is a fully automatic battery charger.
3. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
4. chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
5. Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..
Note: Can not be used to charge the lithium battery.
Feature:
Touch switch mode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over temperature protection: Yes
Short circuit protection: Yes
Overcurrent protection: Yes
Overheat protection: Yes
Fire protection: Yes
Low voltage protection: Yes
Over voltage protection: Yes
Reverse protection: Yes
Electric shock protection: Yes
Cooling: Fan
Color: Yellow/Red
Specification:
Input voltage: 110-220V AC, 50-60Hz
Rated output: 12V 10A , 24V 5A
Output line length: 65cm
Power: 180W
Multiple modes: Car / motorcycle / AGM / GEL / lead acid
Mode: Summer/winter
Display: Voltage, current, temperature, repair, completion, reverse
Thermal protect: 65'C+/-5'C
Compliant standards: CE, FC, Rohs, PSE
Dimension (L×W×H): 158×95×62mm
Note:
This Charger is for battery capacity between 2AH to 150AH.
Pls check the capacity (AH) of your battery before buying the charger! Thanks!
Package Included:
1 X 12/24V Pulse Repair LCD Charger
