Car Digital Inductive Timing Light Automotive Engine Ignition Tester Tool

Product Overview

Professional set initial and advance timing to obtain total timing and peak performance

Display engine speed up to 9, 000 RPM, and ignition spark advance from 0-90

Designed for precise tuning and diagnostic work and works with 12 volt systems

Pushbutton control to adjust advance and switch between 4 and 2 cycle engines

Super bright Xenon flash, and a high vis LED display

Features: Allows one person to start and crank the engine from either side of the vehicle. Push button switch provides long life and reliable operation A red light glows when starter switch is connected to a hot circuit High current clips with protective boots 5 foot oil and grease resistant 12-gauge wire leads​

Note: Exercise care when making this connection because battery voltage is always present at the solenoid or starter relay. Personal injury may be caused if leads are shorted to a ground through tools, wires or wristwatch. Turn the ignition switch to the On position before using the Remote Starter Switch if you wish to start the engine. If the vehicle is equipped with an engine Hot indicator, the lamp test circuit which is in the ignition system could be damaged if the remote starter switch is energized with the ignition switch in the Off position. Key in the off position would be used if you’re just cranking the engine over for special jobs like setting valves, or testing compression. Please read the insctructions carefully before your use.