Cloud Microphones Cloudlifter CL-1 by Cloud Microphones Cloud Lifter Mic Amplifier Mic Preamp Activator Mic Booster Cloud Microphone [CL-1+XLR Cable

✅ [The Cloudlifter series has sold over 300,000 units worldwide] It is loved by not only YouTubers and podcasters, but also musicians, PAs, and recording engineers, and is used for a variety of purposes from world-class concert halls to radio production. ✅ [Useful in situations where noise is a problem] It is useful in situations where passive microphones are used and suffer from noise, such as situations where the output level of the microphone being used is low or the preamplifier being used is noisy, or as a countermeasure against noise picked up by long cables, such as on live stages or recording sites. Also, since the microphone signal can be boosted immediately after the sound source, it has the effect of suppressing noise, and is also effective for XLR lines for acoustic guitars. ✅ [High-quality preamplifier] [Cloudlifter CL-1] is the standard model in the Cloudlifter series released by Cloud Microphones, which has received tremendous support as a microphone booster. An in-line mic preamp that uses phantom power (48v) to convert up to +25dB of ultra-clean gain and boost your audio signal. ✅ [Up to 25dB amplification while maintaining clarity] Adds up to 25dB gain to passive microphones with low output such as dynamic microphones and ribbon microphones. By amplifying the microphone signal while keeping it clear before inputting it to the preamplifier, the original performance of the microphone is maximized. ✅[Easy, just connect! ]Easy to use: just connect your audio interface and microphone with an XLR cable, and then turn on the phantom power switch on your audio interface. With this alone, you can significantly increase the volume of a passive microphone that has a low sound level. ※※※Note※※※This unit requires phantom power. ✅ [XLR cable selection] There are two types of cables to choose from: CANARE, which has a clear high range, or Gotham, which has a natural and wide range. Both manufacturers use Neutrik connectors, and the products are soldered and assembled by reliable domestic specialty stores. ✅ [Cloud Microphones, which first exhibited at the AES Show in New York in 2009, is an American manufacturer that has revived RCA's famous ribbon microphone from the 1930s into the modern era using its own technology.] Cloud Microphones products use a patented gain circuit using the latest technology to overcome the low output weaknesses of traditional ribbon microphones, while still achieving the natural, rich characteristics of the RCA style. The Cloudlifter series was released as a device that amplifies microphone signals by extracting patented gain circuit technology. The Cloudlifter series has remained unchanged since its release and continues to be produced in Arizona, USA. ✅ [MADE IN USA] Cloud Microphones' award-winning ribbon microphone and Cloudlifter series ✅[Cloudlifter series product overview] Cloudlifter is an in-line type microphone preamplifier that operates using phantom power. A unique system that significantly increases the gain of the microphone while maintaining clarity without unnecessary coloring brings out the true characteristics of the microphone to its maximum potential. ✅ [Features] - Can be used with low output passive microphones such as dynamic microphones and ribbon microphones - Amplifies output passive microphone signals up to 25dB using phantom power - Durable and portable for use in studios, stages, broadcast stations, etc. - Noticeably clean and amplified audio signal - Ideal for recording directly in your DAW using low output dynamic microphones. - Phantom power is not applied to the microphone side, protecting the delicate ribbon microphone from damage.