[Solar charging during the day, illuminating with vibration at night] The strobe light has a built-in solar panel and automatically charges with solar energy. A light sensor prevents it from turning on automatically during the day, but it will automatically flash when vibrating at night while the vehicle is moving. There's no need to replace batteries or charge them regularly; simply leave it in the sun and it will automatically charge, so you don't have to worry about running out of battery. Note: The light is equipped with a vibration sensor that automatically goes into sleep mode if there is no vibration for one minute.
[One-Touch, Multiple Flashing Modes, Increased Safety] This compact warning light is equipped with 16 high-brightness RGB LED chips, providing greater brightness and energy efficiency than standard light bulbs. It offers approximately 13 alternating red and blue flashing modes, including flowing, flashing, and strobe, allowing you to choose the one that best suits your needs. Simply press and hold the switch for three seconds to easily turn it on/off, or lightly touch to change the flashing pattern. The LED color collision warning light offers high visibility and excellent warning effect, enhancing your vehicle's luxurious look and creating a special atmosphere.
[Light-resistant material, waterproof and dustproof] Made of high-quality transparent ABS material, prolonged exposure to sunlight will not affect the lamp's functionality. Highly durable. The LED strobe lamp features a fully sealed design that prevents water and dust from entering. No additional processing is required, so you can use it with confidence. Your car will likely attract attention in bad weather, such as rainy days.
[Easy Installation, No Wiring Required] The warning light measures approximately 9*3*2cm and weighs only about 45g. It comes with strong double-sided tape, making it stable and difficult to remove. There's no need to drill holes for screws, and you can install and use it right away without worrying about installation location or wiring length. Note: To avoid the lamp falling off, avoid prolonged exposure to water, and check the stability of the double-sided tape after rain.
[Universal Signal Lights for a Wide Range of Uses] Compatible with a variety of vehicles, including cars, motorcycles, electric vehicles, and bicycles. They can also be used as license plate lights, sidelights, taillights, and illuminations, making them useful in a variety of situations. There are no restrictions on vehicle type or power source, so simply choose your preferred style for easy use. If you have any issues with the product quality, please feel free to let us know by clicking "Store Name" - "Ask a Question."
[Note] The light sensor function is installed, so it will not light up during the day or in bright places.
▼Product specifications:
✧Product Name: Strobe Light/LED Warning Lamp
✧LED type: RGB LED chip
✧ Number of bubbles: 16 SMD
✧Light color: Red and blue flashing alternately
✧Working method: Photosensitive sensor and vibration detection
✧Installation method: Double-sided tape
✧Power supply: Solar power
✧How to use: Press and hold for about 3 seconds to turn on/off, short press or touch to switch lighting modes
*If the power is insufficient, the brightness will decrease.
▼Solar charging/no wiring required:
The flashing warning light is equipped with a solar charging panel measuring approximately 8*2cm, which automatically charges during the day and vibrates to illuminate brightly at night. There's no need for frequent charging, no wiring required, and the waterproof switch makes it safe for outdoor use.
▼Switch-equipped and various flash modes:
The 16 high-brightness LEDs provide more light than standard halogen lamps and are more energy-efficient. The 12/13 flashing modes allow you to easily switch between a variety of lighting patterns, including flowing and flashing, with just one touch. This LED car light offers high visibility and is effective in preventing rear-end collisions at night.
▼Light sensor and vibration function:
To save energy, it will not light up in bright places during the day. It will light up at night or in slightly dark places by vibrating. It will automatically turn off if there is no vibration for one minute. It is easy to turn on and convenient to operate.
▼Compact and easy to install:
This compact LED flashlight can be installed anywhere without wiring. Simply attach it with the included double-sided tape. It can be used on cars, tricycles, bicycles, etc., and can be used in conjunction with brake lights to alert following vehicles to your presence.
Please note:
1. When you receive this product, please charge it in sunlight first. 2. It is equipped with a photosensitive function, so it will not light up during the day, but it will charge automatically. 3. Since the flashing lights operate independently, the flashing may not be synchronized when using multiple lights at the same time. There is also no constant lighting mode. Please be aware of this in advance. 4. Since it is attached with double-sided tape, please clean the area where you will be attaching it beforehand. Also, please check the stability of the tape after rain to prevent it from falling. 5. If you have any problems with the product, please feel free to let us know by clicking "Store Name" - "Ask a Question."
